The supported heat sources are (1) combined use with a rice husk combustion furnace (newly purchased, connected to an existing combustion furnace, etc.), (2) diesel, (3) LNG/LPG gas, and (4) steam generated by a steam boiler. We will discuss with you which type of heat source is best for the country or region where it will be installed and decide on the type.
It depends on the country, climate, temperature, and the type of paddy. We will work with you to calculate the appropriate drying time based on the initial and appropriate moisture content.
We have various models of different sizes. Once you tell us the available space in your facility, we will suggest the appropriate model. If you are planning to build a warehouse to house your machines, we can consult and advise you on how much space will be required depending on how many units will be installed and what the heat source will be.
The shipping specification will vary depending on the three-phase voltage used in your region. Please contact us to confirm.
Each part of our equipment has been designed for maximum durability. If you would like to know about specific parts, please contact us, and we will gladly give you full details and specifications.
It depends on the type and size of the paddy to be processed. So please let us know the information about the paddy.
Please let us know the voltage available at your facilities, and we can adjust the motor to match the supply available.
Our Paddy Husker requires a 0.65MPa air compressor to operate.
Yes. It is possible by using a timer, even while sorting, according to the percentage of stones in the material.
Yes. Our De-stoner can sort various other grains. We offer free consulting. Please feel free to contact us with details of the grains and seeds you wish to sort. We will confirm whether our de-stoner can handle them.
Selecting the most suitable machine depends on the variety of long grain, drying method, and required capacity. Please feel free to contact us to confirm the necessary information and make suggestions.
For each of our machines, we continue to offer consumable parts for ten years after its production is discontinued.
Please get in touch with us with details of your planned processing capacity. We will recommend machines and milling processes to match your needs.
This model is specifically designed for processing short-grain. It is not suitable for processing long grain. Please get in touch with us with details of your requirements, and we will recommend a suitable machine from our lineup.
Yes. In fact, our DP-3001 provides four combinations for the white rice and bran discharge locations. We offer free consulting — please feel free to contact us to discuss your requirements.
Yes. Our Magnetic Separators can sort a variety of seeds. We would be happy to provide you with a free consultation. Please feel free to contact us with details of your sorting, capacity, and other requirements so that we can recommend the most suitable machine.
Only single-phase 100V is available. If single-phase 100V is not available in your area, please use a down transformer to make single-phase 100V and supply it to the machine. The required capacity is 1kVA or more.
Yes, it is possible under certain conditions. Please use the optional Gauze Screen and Straight Roll as a set.
Only single-phase 100V is available. If single-phase 100V is not available in your area, please use a down transformer to make single-phase 100V and supply it to the machine. The required capacity is 1kVA or more.
Only single-phase 100V is available. If single-phase 100V is not available in your area, please use a down transformer to make single-phase 100V and supply it to the machine. The required capacity is 1kVA or more.
Need any help?